Take extra care when inserting connectors to ports of Expansion Boards. Connectors can be inserted only one way. With the expansion board facing up, look for the soldered “=” symbol on the left side of the port. The connector side with the wires exposed should be facing toward the soldered “=” symbol as you insert into the port. If a plug won’t fit easily into a port connector, do not force it. Super popular ideas like the NASA Apollo Saturn V (21309) or the Old Fishing Store (21310) are sets people can now own. And now you can combine our specially designed LEGO® lights to your collection and bring them to life! Easy to install LEGO® light kits Reconnect the 2×6 plate to the rest of the roof, without the white plate underneath. Then remove the red light with white stud underneath so we can install another flashing Bit Light to it. Before we hide the 2 cables from the right we will first install an LED to the blue light at the right side window. To do this, remove this section at the grey stud with clip. PLEASE NOTE: THIS IS ONLY LeLightGo LEGO LIGHTS. LEGO® SET IS NOT INCLUDED. ABOUT WARRANTY & SERVICE

Before reconnecting the white Lego pieces which make up the front bonnet, ensure that the cables from the LEDs are laid in between the studs of the Lego plates underneath as per below example images. If you want to control the lights and get a special sound kit, then it's best to get the Standard RC + Sound Version. However, both Standard RC + Sound, Standard Remote and Standard versions are a wonder to behold at the same time as they come with the same lights. ABOUT INSTALLATIONThis kit has not one, but two sound modules, and together these modules can play four sounds at the same time. This provides the most realistic sound possible, including: Authentic Cadillac ambulance engine sound that loops until you stop it. Includes unique start and stop sounds, and even a great"engine stall" sound that will be triggered 40% of the time when you start the engine. Locate 2 of the provided grey plates with clips as we will be replacing the original ones with these. Take another 2 flashing Bit Lights and install them by placing them over the studs and connecting the blue transparent round pieces over the top. One 3-Voice Polyphonic Sound Chip with Ecto-1 Siren, Engine, Door, and Alarm Sound EffectsPre-Loaded Take another flashing Bit light and install it to this section ensuring that the LED is laid over the white stud and secured down by reconnecting the red piece over the top.

The LEGO Ghostbusters Ecto 1 (21108) is a faithful recreation of the iconic vehicle from the hit 80s movie franchise, Ghostbusters! The Modular Building series is a dream come true for adult fans of LEGO®. With ultra-detailed buildings, ranging from a Town Hall (10224) to a Detective's Office (10246), there is enough variety in sets to create your own large scale LEGO® town. And now with our easy to install light kits, you can create your very own realistic and fully functioning town. LEGO® Technic Take another expansion board ( expansion board#2) and connect the first group of 6 lights from the front section of the roof to the first available ports on the expansion board. Hide 2 cables from the lights on the left side of the car (looking from the front) up the left side by laying them in between the white studs and then reconnecting the grey triangular plates over the top of them. Repeat this step for the cables from the tail lights, twisting/winding them around each other. We should now have 2 groups of cables.Genuine LEGO® Parts for the Movie-Accurate Replacement Roof Strobe, Motor, and to Hold Adapters and Controllers in Place KIT itself : really nice KIT. You just simply can not compare to "without light" KIT. That is an another level. Remove the front section with the grill and number plate attached, followed by the 2 Lego 2×4 plates with light pieces attached. To find a lighting kit for your LEGO® set, simply scroll and browse below to find the appropriate light up kit. You can also use the search function above and type in the model name or number to find your set. Take the 5cm connecting cable from the kit and connect it to the last available port on expansion board#2.