Although markings are not provided on the jig, it offers a 37mm offset from one side and a 50mm offset from the other side. Meanwhile, the spacing between two consecutive holes is 25.4 mm or 1 inch which is good enough. In fact, the size of each hole is 1/4 inches, so you won’t find any difficulty using any kind of hinges. If you like doing DIY projects, Woodhaven offers one of the best shelf jigs in the market which is super easy to use and does not make things complicated for new users.

Starting with the design, the template comes with a transparent finish, so it’s easier for beginner users to work using this jig. In fact, the size of the template is quite decent as it offers about 11 holes of 1/4 inch diameter. The design of the template is pretty simple, and long enough, so it’ll be a viable choice to use in larger projects. There are two rows of 11 holes provided on this template with a spacing of 32mm while each hole has a diameter of 1/4 inches. Talking about its design and build quality, the template is transparent and comes with pretty clean markings mentioned as well. Moreover, the quality of the template is very satisfactory and feels very sturdy in hand. The best part of these, however, is that the shank (the bit your drill holds) is a standard size. so long as you get a Pin Vise which holds 3.2mm drill bits, which is the standard shank diameter for PCB Drill Bits.The jig comes complete with a 1/4" (6mm) drill bit that fits commonly available shelf-pins. A 5mm drill bit is also available separately Next up, if you are looking for an affordable shelf pin jig out there, Milescraft is quite a good brand to consider as it’s pretty famous for offering budget-friendly tools. Not all Pin Vises hold this diameter however so I will note the ones below which do. The best way to drill Space Marine Gun Barrels

Perfect for Building or Adding Holes to Existing Furniture The compact size of the Shelf Pin Jig makes it perfect for adding additional shelf pin holes in existing furniture, as well as for building projects from scratch. And, since there are two rows of holes available on this jig, one offers an offset distance of standard 37mm while the other one offers 64mm offset distance. The jig is designed to be highly practical, and it even comes with a high-end 1/4 inches drill bit as well. This can be annoying if you are often swapping between drill bits which require a different collet. The Best Drill Bits for Models, 3D Prints & Miniatures

M6 5-Lobe Pin Security Drill Bit

Start by marking the spot where the hole needs to be drilled. This lets you know where to position the tip of the drill bit. 2. Find the right angle. FILPIN is to be considered whenever core build-up is used and less than one half of a coronal tooth structure remaining. Bonding alone is not sufficient in many situations were minimal tooth structure is present. Pins provide anti-rotational benefit when a single post is used. As I’ve said above, the best option, at a comparable price to the Citadel Pin Vise is the Tamiya Extra Fine which comes in a fully metal version or rubberised handle version. As the most important part of any drill is the bits you use. the convenience of being able to add standard drill bits with a 3.2mm shank just makes things so convenient by not having to keep changing collets to swap drill bit sizes. So anything which houses a 3.2mm shank is worth an investment.