The Ei146e may operate as a standalone Alarm or may be interconnected via hardwire to communicate with compatible Ei Alarms and accessories. From here, the RadioLINK+ just needed the new alarm or accessory to be added to allow for remote control, test and asset management. The alarm is supplied with an easi-fit base for quick, simple installations and a test/hush button to facilitate frequent testing of the alarm. Optical alarms are best at detecting slow, smouldering fire which are commonly caused by sofas or electrical fires.

To find out more about cookies, including how you can disable/enable them in your browser, visit www. You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice. The information does not usually directly identify you, but it can give you a more personalised and consistent web experience. The Ei146e is an Optical Smoke Alarm with 230V AC mains power supply and 9V alkaline battery back-up.The RadioLink wireless interconnection allows for a less disruptive and seamless interlinking with other Aico alarms.

This is the Aico Ei146e Optical Smoke Alarm Mains Powered with RadioLink, 9V Alkaline Battery Back-up and Easi-fit Base available at Sparks. Ei146E can be operated independently or may be interconnected to other alarms via the optional RadioLink base. It also boasts an optical proven smoke chamber that ensures advanced fire detection while reducing any unwanted tripping. Different alarms sensors work best at detecting different types of fire and so should be sited in appropriate rooms throughout a property. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

The Alarm is supplied with the " Easi-fit" base to facilitate quick and simple installation, combined with easy detector head removal and replacement. The alarm operates using the mains power supply with a replaceable 9V alkaline battery back up in case of electrical mains failure.

However, if possible it is recommended that the alarms are all powered from a dedicated circuit from the distribution board using 3 core and earth cable for safety during maintenance, as the interlink cable will carry power from live alarms on other power circuits.The report generated is easy to read and gives details of any incident immediately, meaning the feedback is instant. To obtain a mains power supply, each alarm can be connected to the nearest lighting circuit using 2 core and earth cable with a separate, dedicated interlink cable connecting all alarms. This alarm conforms to the latest British Standards, but further intervention may be required to wake sleeping children.