If the laptop powers on properly, that means the power adapter is working properly and the problem is likely a bum battery. You can always re-install the battery and try again—maybe the battery was just poorly seated. Following are the ways to troubleshoot various hardware issue that could be causing the charger not to work: Several internal parts can cause problems when they malfunction or fail. Common culprits include a faulty motherboard, damaged charging circuits, and malfunctioning battery sensors. Your particular make and model of laptop will likely have its own unique issues, and a seasoned tech support operator will have seen all of them. You can also assign actions like sleep and shut down when your lid is closed or the power button is pressed. The easiest way to make sure that your settings aren't causing problems is to restore the power profile to default settings. Batteries are susceptible to heat, so if your laptop is overheating, that could cause a problem. As the temperature rises, the battery sensor may misfire, telling the system that the battery is either fully charged or missing completely, causing the charging problems. You may even find that your system shuts down to prevent overheating a battery and causing a fire.

At this point, if it still doesn’t work, we've determined that it's not just user error causing the problem. There is a real issue with powering the laptop; now it's simply a matter of figuring out where the problem may be. That begins with eliminating where it isn't. Please remove the battery of the laptop from its respective compartment and connect it again after a full minuter. Connect the charger with the laptop and see if the charging LED of the laptop lights up or not. It sounds silly, but you need to make sure the laptop is actually plugged in. This is a major reason a computer may not even start. No software tweak or hardware repair can make a disconnected laptop magically power on. Updating the BIOS may fix several other issues, including the laptop not charging problem as well, but you would have to be very careful while performing it, as even a small misstep could result in data loss or something even worse, such as permanent damage to the motherboard. Here are the steps to update the BIOS of the laptop: On a Mac, you'll need to try resetting the System Management Controller (SMC). For laptops with removable batteries, this is as simple as shutting down and disconnecting the computer, removing the battery, and then pressing the power button for five seconds. Reinsert the battery, reconnect the charger, and fire up the laptop again.All of the issues mentioned above are easily fixable, and you will find the solutions in the next section of the article. Mac users can open System Preferences > Energy Saver, then review your preferences. Mac settings are adjusted with a slider, letting you select the amount of time the computer can sit idle until it goes to sleep. If the interval is too short, you might suspect battery issues when settings are the true culprit. There are numerous ways to take care of your battery, but between the wall outlet and your computer there are also several things that can fail. Some are easy to fix yourself with a software tweak or a new battery, but other problems may require a visit to a repair shop, or even a full-blown system replacement.

Out Put 12V, 3A/ 2A, Pin Size: 3.5mm x 1.35mm, (3A charger is 100% safe to use with lower 2A power laptop) To find out whether or not the problem even has anything to do with the laptop at all, try plugging the power cord into a different outlet. If it's plugged into a surge protector or power strip, take it out and plug it directly into the wall. This will tell us if there's an issue with the laptop or if you have a short or a blown fuse. For newer Macs with batteries sealed into the chassis, shut down the computer but leave the power adapter connected. With the power off, press and hold the power button while pressing Shift + Control + Option on the left-hand side of the keyboard. Release the keys and power button simultaneously, then attempt to power on the laptop.A recent Windows 10 update may have disrupted the battery's ability to detect the charger. It is mainly due to the incompatibility of the battery's driver with the new Windows update or because of its outdatedness. You can fix it by update the battery's driver through Windows Device Manager utility and here are the steps to do that: In some cases, you may find a device with two USB-C ports: one that can be used for charging or data transfer, and one that is only designated for data transfer. If you run into a non-charging issue, make sure you are connected to the correct USB-C port. You may even be able to see a little icon on the side that indicates which port is meant for charging. While we generally recommend using the charger that came with the computer (or one that was made by the same company as your laptop), sometimes third-party USB-C chargers are necessary. If this is the case, try to use one that’s been certified by the USB-IF. Plug the laptop into a different power outlet. Unplug the laptop, wait a few minutes, and then plug it into an outlet on a different wall or room. If the laptop charges when connected elsewhere, the problem is not your computer or charger. Whenever you connect the charger to your laptop, you will instantly receive an indication in the form of a beeping sound, or a dedicated LED installed inside the computer will light up. If that does not happen and you find the laptop not charger even after plugging in the charger, then there could be several factors behind such a problem. Here are some of them:

If the power adapter works for a little while but then turns off, there may be interference with the outlet. Unplug the power adapter for about 30 seconds and then try again. [1] X Research source USB-C is a popular cross-platform standard for connecting peripherals, transferring data, and charging your battery. The new standard allows for thinner devices, but might also cause some confusion. Some manufacturers have opted to make certain USB-C ports data-only, so they won't charge your device. Just because a power adapter fits into your laptop's charging port doesn’t mean it’s powerful enough to charge your computer. This goes for any type of charger, but it’s an especially common problem with laptops that charge over USB-C—you can technically plug in any USB-PD charger, but some may have too low a wattage to properly charge.It doesn't matter if the issue with the charger not working on your laptop is related to hardware or software as the four handy solutions mentioned below will help in fixing and have your laptop's battery up and charging in no time: The power reset of the laptop is the answer to most things. Sometimes the device needs a tuneup, and the power reset brings that to the table. Here is the method to hard reset the laptop: In terms of accessories, UKlaptopcharger sells all replacement chargers for Geo Computer Series computers such as the GeoFlex and Infinity Geo. Additionally, This Geobook 2e laptop charger provides a complete charging solution and ease of use. The Geobookis a one-of-a-kind laptop series that is now available in the United Kingdom which is designed specifically for students and other business users who prefer a more lightweight experience. Technical Specifications are as follows of Geobook 2e laptop charger If your laptop doesn't have a visible battery compartment on the bottom, it may be built into the laptop (like most Macs are), and you'll either have to open it up yourself or take it to a repair specialist to test the battery.